Austin Healey Brakes / Clutch
Austin Healey 3000 Girling Mk2A Booster Servo. These are original equipment units not reproductions, Note: All worn corroded bores are brass sleeved to eliminate seizing during long storage periods.
Austin Healey 3000 Mk2B Booster Servo has a band clamp holding vacuum chamber together, we can rebuild your unit or buy from stock with refundable deposit
Austin Healey Booster Servo MK2A Repair Kit, Girling kit part # SP2228
Austin Healey Booster Servo, all 5 bores brass sleeved, yours done. Also found on Aston Martin, Jaguar, Volvo Sunbeam, MGC etc
Replace those fragile black plastic air valves with our custom Apple Hydraulics bronze valves.
Fits Austin Healey Booster Servo
Crimp Style Booster Part#: SP2625 Cross reference#: 780-205, 021-173
MK2B Band Clamp Style Booster, Girling kit Part # SP2625
These are OEM calipers fit the later Power Brake Booster cars, re-built with new pistons and rubber parts, new bleeders. To identify look for 16P or 16PB embossed on casting, also let us know if inlet line is Metric or American thread
Fits BN7, BJ7, up to chassis #26704, Non Power Brake Servo Booster cars, easy to identify #14 embossed on casting, (later power assist cars have #16 embossed) early and late calipers are not interchangeable.
Send us empty casting (all fittings, bleeders, etc. removed) and we will clean it, re-sleeve with brass to standard size and return, so you can reassemble using kit you provide.
Send us empty casting (all fittings, bleeders, etc. removed) and we will clean it, re-sleeve with brass to standard size and return, so you can reassemble using kit you provide.
You can place your order online here and then send your parts in for rebuilding: Send us complete cylinder. (Sleeving Only: Send us empty casting).
Sprite Brake/Clutch tandem brake master, Brass Sleeved to original 7/8" or 3/4"bore size. These are OEM masters re-built with a high quality kit.
Fits 1963 - 1980 Midget / Sprite - . These are OEM Calipers rebuilt with new pistons, seals, boots, and bleeder screw. These are NOT offshore reproduction units
Sprite Brake/Clutch tandem brake master, Brass Sleeved to original 7/8" or 3/4"bore size.
You can place your order online here and then send your parts in for rebuilding: Send us complete cylinder. (Sleeving Only: Send us empty casting).
Send us empty casting (all fittings, bleeders, etc. removed) and we will clean it, re-sleeve with brass to standard size and return, so you can reassemble using kit you provide.
Fits: MGA, SPRITE, MIDGET Real wheel cylinder brass sleeved and re-built