Brake Cylinder Sleeved
SEND US YOUR CYLINDERS FOR SLEEVING
Send us empty casting (all fittings, bleeders, etc. removed) and we will clean it, re-sleeve with brass to standard size and return, so you can reassemble using kit you provide. Prices are same as for American cylinders, with some exceptions: Prices for most common cylinders and bores up to 1-1/8" (larger bores additional charge).
- Master cylinder, single circuit (most pre 1967) - $115
- Master cylinder, dual circuit (most 1967 & later) - $145 most
- Tandem masters - (for two sleeves, MGA and similar) - $145
- Masters with wrap-around tin-can reservoir - $145 most
- Wheel cylinders - $60 most
- Wheel cyls with a slot for hand brake arm - $75
- Dunlop caliper cylinders - $75 most
- Dunlop caliper cylinders, 2-1/2 inch bore & wide flange $115
- For metric bores we will add 20% cost
CHOOSE YOUR CYLINDER TYPE BELOW
Send us empty casting (all fittings, bleeders, etc. removed) and we will clean it, re-sleeve with brass to standard size and return, so you can reassemble using kit you provide.
Send us empty casting (all fittings, bleeders, etc. removed) and we will clean it, re-sleeve with brass to standard size and return, so you can reassemble using kit you provide.
Send us empty casting (all fittings, bleeders, etc. removed) and we will clean it, re-sleeve with brass to standard size and return, so you can reassemble using kit you provide.
MGA 1956 -1962 Brass Sleeved to original 7/8" bore size. Cross Reference #: 1174
Send us empty casting (all fittings, bleeders, etc. removed) and we will clean it, re-sleeve with brass to standard size and return, so you can reassemble using kit you provide.
Send us empty casting (all fittings, bleeders, etc. removed) and we will clean it, re-sleeve with brass to standard size and return, so you can reassemble using kit you provide.
Two removable cylinders on each caliper, prices are per each cylinder. To order, call or email 631-369-9515 / info@applehydraulics.com