Chrysler

Single arm, rear, stamped metal cover, part # on the cover Part #: 2100-2199

These links are often found on PreWar Chrysler and other makes larger cars, buses and trucks etc. Please allow 7 to 10 days to re-bush your links, please call if you need new links, as we need to ask several questions (new links cost more then re-bushing your originals.)

Front, Rear, Left, and Right Available. Externally cleaned to the bare metal. Housings re-bushed with bronze bushings, shafts reground and polished.

A nice example of an early Kelsey Hayes remote booster / servo. These unity are tricky to re-build and require more hours than later K/H units.

Part #: 1800-1899, Single arm, rear, screw in ends, part # on valve cover. This is an inertia valve ride control shock, this unique shock has the capability of altering its stiffness based on road conditions.

Part #: 1300-1399, Single arm, front and rear, stamped metal cover. Vintage Chrysler front and rear lever shocks

Part #: 1850 A/B, C/D Single arm, rear, screw in end caps, part # rear cover with 6 screws. This is an inertia valve ride control shock, this unique shock has the capability of altering its stiffness based on road conditions.

Your wheel cylinder sleeved to original bore size, and rebuilt.

Early first generation fluid brake system, cutting edge at the time.

These links are often found on PreWar Chrysler and other makes larger cars, buses and trucks etc. Please allow 7 to 10 days to re-bush your links, please call if you need new links, as we need to ask several questions (new links cost more then re-bushing your originals.)