Chevrolet Brakes
AMERICAN MASTER & WHEEL CYLINDERS
Buick - Cadillac/LaSalle - Chevrolet (Chevy) - Corvette - Camaro - Chrysler - Dodge/DeSoto - Ford - Mustang - Thunderbird - Lincoln/Mercury - Oldsmobile - Packard - Plymouth - Pontiac - Studebaker
SLEEVING ONLY
Send us empty casting (all fittings, bleeders, etc. removed) and we will clean it, resleeve with brass to standard size and return, so you can reassemble using kit you provide.
MASTER AND WHEEL CYLINDERS
Master cylinder, single circuit, w remote reservoir (many pre-1930)(threaded end cap type $165)
$165 $245
Master cylinder, "in a box", with rotating arm on the side (some pre-1930)
$245 $585
Master cylinder, single circuit, cylinder and its reservoir cast as one piece (most 1930-1966) most
$145 $245
Master cylinder, dual circuit (most 1967 & later)
$185 $385
Master cylinder, 1956 Buick,(seal repair kit $75)
$185 $545
Wheel cylinder, straight bore
$85 $95&up
Wheel cylinder, step bore
$125 $165
Treadlevac power brake units, 1952-60 Bendix and Delco-Moraine (add $50 if new main shaft is needed)
$185 $595
Bendix Hydrovac power brake unit, 1950s Cadillac and other passenger cars, most units
$245 $585
COMPLETE REBUILDING
Send us complete cylinder (as it came off the car) and we will return it cleaned, brass sleeved and assembled with new rebuild kit, ready to install back on the car.
SLEEVING ONLY
$145
$245
$145
$185
$185
$85
$125
$185
$245
COMPLETE REBUILDING
$245
$585
$245
$385
$545
$95&up
$165
$595
$585
Prices listed above are for 1 1/8 inch or smaller bore sizes (modest additional charge on larger cylinders) 631-369-9515 Mon - Fri 8:30 AM - 4:00 PM EST or email info@applehydraulics.com
Chevrolet Brakes
Application: Many American Vehicles from the 1950s.
Your Single Circuit Master Sleeved - Your Dual Circuit Cylinder Sleeved - Your Single Circuit Sleeved and Rebuilt - Your Dual Circuit Sleeved and Rebuilt -
Freeze plug on front of cylinder with part # identifys the exact application. i.e. Corvette - 5454480 320-G
ONE SET of 4 Chevy Delco Lever shocks Part # 2200A/B and 2100A/B
ONE PAIR Chevy front lever shock. Part #: 2200A/B (A is right, B is left)
One Chevy front lever shock. Part #: 2200 A or B (picture shows 2200B right side)
Part #: 2100A/B (A is right side, B left)
Fits 1934-38 Chevrolet Master Deluxe, yours rebuilt, repair kit, Picture shows some of the parts we use in rebuilding these state of the art knee shocks
In Stock ready to ship. Fits 1934-38 Master Deluxe. Does not fit Pontiac or 6 wheel Chevy.
Single arm, front and rear, stamped metal cover. Part #: 1200-1299
You will find these large box type brake masters on special use trucks and equipment, such as fire trucks, international trucks, street sweepers, garbage trucks etc. the peddle bell crank shaft also needs re-bushing and new seals to prevent brake fluid leakage.
You will find these large box type brake masters on special use trucks and equipment, such as fire trucks, international trucks, street sweepers, garbage trucks etc. the peddle bell crank shaft also needs re-bushing and new seals to prevent brake fluid leakage.
Single arm, Dual action rear, part # stamped on end cap cover, Part #: 1700-1799. Also used on Pickup trucks as dual action upgrade.
Single arm, Dual action rear, part # stamped on end cap cover, Part #: 1700-1750.