MGB
EUROPEAN BRAKE MASTERS RE-BUILT, (please see your car listing for up to date pricing)
Send us complete cylinder (as it came off the car) and we will return it cleaned, brass sleeved and assembled with new rebuild kit, ready to install back on the car. Masters that use removable plastic reservoirs are supplied without said reservoirs (new under reservoir seals are included). When sending cores for rebuild or exchange, please send without the reservoir. Please see your car listing for up to date pricing
SLEEVING ONLY
{Please see your car listing for accurate pricing}, Send us empty casting (all fittings, bleeders, etc. removed) and we will clean it, resleeve with brass to standard size and return, so you can reassemble using kit you provide.
MASTER AND WHEEL CYLINDERS
Austin Healey 100-4
$245 $385
Austin Healey 100-6, 3000
$145 $185
Austin Healey Sprite (clutch & brake tandem)
$245 $285
Austin Healey Sprite (1968-79)
$245 $285
Jaguar XK120 (tandem)
$345 $485
Jaguar XK120-140 (standard)
$185 $245
Jaguar XK150
$185 $245
Jaguar XKE 1961-63
$185 $245
Jaguar XKE 1964-74
$215 $295
MGA (clutch & brake tandem)
$245 $345
MGA Twin Cam
$245 $315
MGB 1963-1967 Tin Can
$315 $385
MGC
$285 $485
MGTD, TF
$185 $245
MGTC
$245 $385
MG Midget (clutch & brake tandem,)
$245 $285
MG Midget (1968-79)
$245 $285
Rolls Royce, Bentley (each of two)
$245 $285
TR-2, 3 (clutch & brake tandem, 1953-56)
$245 $345
TR-3, 4, 4A
$145 $185
TR-6
$245 $285
TR-6, 8
$245 $285
TR Spitfire 1962-67 and 1976-80
$245 $285
TR Spitfire 1968-75)
$245 $285
We can do most power boosters:
Sunbeam ,Aston-Martin, Volvo, Rover, Triumph, MG,
Sunbeam, Austin Healey, Maserati, Ferrari, Lancia,
Lamborghini, Alfa Romeo, Fiat, Mercedes, ETC.
COMPLETE REBUILDING
{Please see your car listing for accurate pricing}, Send us complete cylinder (as it came off the car) and we will return it cleaned, brass sleeved and assembled with new rebuild kit, ready to install back on the car.
SLEEVING ONLY
$245
$145
$245
$345
$285
$185
$185
$185
$215
$245
$245
$315
$285
$185
$245
$245
$245
$245
$245
$145
$245
$245
$245
$245
COMPLETE REBUILDING
$385
$185
$285
$285
$485
$245
$245
$245
$295
$345
$315
$485
$385
$245
$385
$285
$285
$285
$345
$185
$285
$285
$285
$285
WHEEL CYLINDERS RE-BUILT
(Jaguar, Alfa Romeo, Avanti, Datsun and others) two removable cylinders on each caliper, prices are per each cylinder
Many
$95
Rear slotted cylinders
$145
$95
$145
MGB
Left and Right calipers available, Fits 1963 - 1980 MGB - These are OEM Calipers rebuilt with new pistons, seals, boots, and bleeder screw.
Power brake cars. MGB 1976-1980. Usually found on single carburetor cars.
1963-1980 MGB Clutch Slave, Brass sleeved to eliminate road grit corrosion.
Repair kit for MGB Booster: Kit Includes: Diaphragm, Bellows, 2 O-rings, Foam Circle, check valve canister seal, all parts needed to properly service your MGB booster.
Carburetors completely disassembled and cleaned Housings rebushed, new standard size throttle shafts New jets, new needles, new float valves New gaskets and O-rings Individually flow bench tested
You can place your order online here and then send your carburetors in for rebuilding. - Carburetors completely disassembled and cleaned - Housings rebushed, new standard size throttle shafts - New jets, new needles, new float valves - New gaskets and O-rings - Individually flow bench tested
You can place your order online here and then send your carburetors in for rebuilding. - Carburetors completely disassembled and cleaned - Housings rebushed, new standard size throttle shafts - New jets, new needles, new float valves - New gaskets and O-rings - Individually flow bench tested
Send us empty casting (all fittings, bleeders, etc. removed) and we will clean it, re-sleeve with brass to standard size and return, so you can reassemble using kit you provide.
Send us empty casting (all fittings, bleeders, etc. removed) and we will clean it, re-sleeve with brass to standard size and return, so you can reassemble using kit you provide.
Send us empty casting (all fittings, bleeders, etc. removed) and we will clean it, re-sleeve with brass to standard size and return, so you can reassemble using kit you provide.
Send us empty casting (all fittings, bleeders, etc. removed) and we will clean it, re-sleeve with brass to standard size and return, so you can reassemble using kit you provide.
MGA 1956 -1962 Brass Sleeved to original 7/8" bore size. Cross Reference #: 1174
Two removable cylinders on each caliper, prices are per each cylinder. To order, call or email 631-369-9515 / info@applehydraulics.com
You can place your order online here and then send your carburetors in for rebuilding. - Carburetor completely disassembled and cleaned - Housing rebushed, new standard size throttle shaft - New jet, new needle, new float valve - New gaskets and O-rings - flow bench tested
MGA 1956 -1962 Brass Sleeved to original 7/8" bore size. These are OEM masters re-built with a high quality parts.
MGA 1956 -1962 Brass Sleeved to original 7/8" bore size. These are OEM masters re-built with a high quality parts.
Send us empty casting (all fittings, bleeders, etc. removed) and we will clean it, re-sleeve with brass to standard size and return, so you can reassemble using kit you provide.