Wheel Cylinders
WHEEL CYLINDERS REBUILT |
||||||
|
 |
|||||
Rear Wheel Cylinder with lever emergency brake, 7/8" bore Put and end to sticking rear brakes. with addition of a brass sleeve aluminum corrosion is eliminated!
Your wheel cylinder sleeved to original bore size, and rebuilt.
Example of Wheel Cylinder used on large industrial machines such as Excavators, Payloaders etc
Wheel cylinder step bore off of a KB - International Truck
Example of Wheel Cylinder used on large industrial machines such as Excavators, Payloaders etc
Cast Iron - Brass Sleeved and re-built - Specify Upper or Lower
Your Master Sleeved and Rebuilt or from stock New units, avoid reservoir leaks, New tin can reservoirs used on from stock Masters. Sleeving only also available.
Your wheel cylinders disassembled cleaned to bare metal, sleeved to original bore size and new rubber kit installed, bleeder port resurfaced and new bleeder screw.
Fits: MGA, SPRITE, MIDGET Real wheel cylinder brass sleeved and re-built
Fits: MGA, SPRITE, MIDGET Real wheel cylinder brass sleeved and re-built
Fits: MGA, SPRITE, MIDGET Real wheel cylinder brass sleeved and re-built
Send us empty casting (all fittings, bleeders, etc. removed) and we will clean it, re-sleeve with brass to standard size and return, so you can reassemble using kit you provide.