-

Part #: 2105A/B Externally cleaned to the bare metal. Housings re-bushed with bronze bushings, shafts reground...

Girling MK2B Band Clamp Style Booster Kit Part#: SP2625

ONE PAIR Chevy front lever shock. Part #: 2200A/B (A is right, B is left)

Left and Right calipers available, Fits 1963 - 1980 MGB - These are OEM Calipers rebuilt with new pistons, seals, boots, and bleeder screw.

3000 MK II & III Rear Austin Healey Lever Shock Part #: 8188 STANDARD REBUILD Externally cleaned to the bare metal. Housings re-bushed...

Part #: 2105C/D Externally cleaned to the bare metal. Housings re-bushed with bronze bushings, shafts reground and polished...

MGA 1500, 1600, Twin Cam (1955-62) STANDARD REBUILD Externally cleaned to the bare metal. Housings re-bushed with bronze bushings.

Austin Healey Booster Servo MK2A Repair Kit, Girling kit part # SP2228

You can place your order online here and then send your carburetors in for rebuilding. - Carburetors completely disassembled and cleaned - Housings rebushed, new standard size throttle shafts - New jets, new needles, new float valves - New gaskets and O-rings - Individually flow bench tested

Part #: 1751V/W, Externally cleaned to the bare metal. Housings re-bushed with bronze bushings, shafts reground and polished.

These are original OEM calipers re-built with new pistons and rubber parts, new bleeders. These calipers are NOT reproduction offshore units. If you are looking for original quality parts, these are the ones to buy. This is a split-able caliper, 4 bolts hold the 2 caliper halves together. Inlet port is (3/8"-24) USA fine thread. There is no bridge pipe as brake fluid passes internally to both pistons.

Kit Includes: Diaphragm, Bellows, 2 O-rings, Foam Circle, check valve canister seal and small hole rubber dam, all parts needed to properly service your Triumph booster.

One Chevy front lever shock. Part #: 2200 A or B (picture shows 2200B right side)

Austin Healey Sprite (1957-70) lever shock dampers. -Externally cleaned to the bare metal.

Front, Rear, Left, or Right Available - Original equipment, not reproductions. Cleaned to the bare metal. Housings rebushed with bronze bushings, shafts reground.

ONE SET of 4 Chevy Delco Lever shocks Part # 2200A/B and 2100A/B

Part #: 1946G/H, Externally cleaned to the bare metal. Housings re-bushed with bronze bushings, shafts reground and polished.

Fits 1934-38 Chevrolet Master Deluxe, yours rebuilt, repair kit, Picture shows some of the parts we use in rebuilding these state of the art knee shocks

MGB & GT (1963-80), STANDARD REBUILD Externally cleaned to the bare metal. Housings re-bushed with bronze bushings, shafts reground and polished.

Buick Front Shock fits all models (1940-1953) except 1940 Ser. 80, 90 - Apple Hydraulics - The industry standard for